What is difference between Partial discharge and corona?
Partial Dischargeusually begins within voids, cracks, or inclusions within a solid dielectric, at conductor-dielectric interfaces within solid or liquid dielectrics, or in bubbles within liquid dielectrics. Since PDs are limited to only a portion of the insulation, the discharges only partially bridge the distance between electrodes. PD can also occur along the boundary between different insulating materials. see Partial discharge - Wikipedia
Consider a HV or EHV underground cable - once a partial discharge starts [e.g. due to some minor production defect], the arcing will slowly degrade the insulation, which in turn will increase the discharge. This is one of the reasons why EHV jointing must be undertaken to high standards of cleanliness. At LV the potential gradients are far less and PD is not a problem.
A corona discharge is an electrical discharg brought on by the ionization of a flui such as air surrounding a conducto that is electrically charged Spontaneous corona discharges occur naturally in high-voltage systems unless care is taken to limit the electric field strength. A corona will occur when the strength (potential gradien) of the electric field around a conductor is high enough to form a conductive region, but not high enough to cause electrical breakdow or arcin to nearby objects. see Corona discharge - Wikipedia Corona discharge is one of the reasons why the conducting parts of EHV equipment tend to be rounded - potential gradients above a rounded surface are far less than above an angular surface.
Source Q-U-O-R-A
Partial discharge testing instrument supplier in India
Corona camera supplier in India.
#pddetection
#coronadetection
https://www.electricaltestkit.com